Please read up on LiPo packs before purchasing.

Note: These can be a tight fit. If they are, carefully sand down the sides of the end cap before inserting. If you try and force these in/out while tight or at an angle, they can fail as you force the end cap off (Each AEP LiPo has the end cap tested under our packing cameras to ensure they are not loose prior to dispatch of each order). While removing these, simply lift the back end of the battery up at the same time as you use the battery release lever. Never try to use a damaged LiPo of any type.

ONLY USE A LITHIUM POLYMER (LIPO) CHARGER WITH THESE BATTERIES. USING A STANDARD CHARGER WILL DAMAGE YOUR BATTERY AND INVALIDATE THE WARRANTY, AND POTENTIALLY DAMAGE YOUR AEP.

If in doubt, call us before use.

We first heard of a LiPo conversion for your AEP a little over a year ago. It involved purchasing an adapter from a Canadian company which got physically soldered into your AEP. This allowed you to use a custom mini LiPo in your AEP removing the need for the poor quality NiMH batteries that come with the AEPs. Unfortunately doing this modification was time consuming, fiddly and invariably this invalidated your warranty.

So rather than go out and source these conversion kits, the boffins in our Technical Department decided to take a different approach. They directly contacted the manufacturer and sent detailed specs of the existing battery plus bare frames for them to play around with. Now, after some development and a few hand-made samples for test purposes, we can officially announce this new product to the Airsoft market!

Ditch the tricky DIY conversion and instead try this plug-in unit. It drops into the body just like your original battery but with higher capacity, better cold weather reliability and the bonus of a faster trigger response and a higher rate of fire!

But why would you want one? Well, put simply, it changes your AEP from a basic gun into a usable skirmish gun. It won't make you 'leet, it won't fire further or even change it's power. But what it will do is give you superb trigger response which was distinctly lacking from AEPs up until now.

We have tested the fitment and can confirm they fit into the following pistols:

CYMA 1911
CYMA Desert Eagle
CYMA/Tokyo Marui Glock 18C
Jieke/Tokyo Marui M93R

And with slight modification to the body:

CYMA 226
Double Eagle M81/Tokyo Marui USP

LiPo cells pack a much greater wallop into a smaller package than conventional Ni-Mh or Ni-Cd cells, however these are not for the beginner! On tests, the 7.4v packs are kicking out the same Rate of Fire as our 8.4v mini packs!

Warning:

Never charge these unattended.
Charge on a fire-proof surface.
Charge using a LiPo balance charger ONLY.

Any figures used are based on tests performed on the products when they are first listed. These can vary due to changes by the manufacturer, gas pressure, gas used and a number of other factors. All figures should be treated as an approximate guide and used for reference only. 

All listed FPS are +/- 5% due to differences from rifle to rifle. If you require a guaranteed FPS, please add an upgrade/downgrade option on to your product (this may cost extra).

All images, product contents and specifications listed are based on checks performed when a product is first listed and may differ due to changes over time made by the manufacturer. This includes package contents in regards to any 'extras' provided e.g. Sample BBs.

We cannot offer an exchange on pyrotechnic devices due to device failure. We are unable to guarantee that the pyrotechnic device has been stored in a moisture free environment or used correctly in accordance with the manufacturers guidelines.

Unless otherwise stated, all products are sold singly.

No airsoft AEG is warrantied for use with an 11.1v LiPo or higher voltage battery at UK velocities (373fps or lower) unless specifically recommended on the product itself. Use of higher voltage batteries can cause failures and will negate any warranty implied or otherwise.