TAG Innovation Filling Station FiSt-2™ for TAG Gas Shells (Single)

Be the first to review this product

£69.95
In Stock
Usually Ships: From Our Warehouse Within 24 Hours
*Estimates exclude weekends & are subject to change*
Earn 69 Target Points
Description

“FiSt-2” – is the filling station for “Shell-HPA”, “Shell-PRO EVO” and “Shell Multi-R”.

This fully redesigned filling adapter has several important improvements:

• The sealing method has changed, now no o-rings will be damaged or blown out during the CO2 bulb replacement even if some pressure has left in the chamber.

• No chance of leaking between the nozzle and filling valve, even when the weather is cold.

• The tempered stainless steel nozzle is redesigned to fit perfectly into our inlet valves. This eliminates the possibility of blowing out the inlet valve’s seal and minimizing the pressure loss during the filling process.

• Now you can use this filling station for filling both CO2 and HPA propellants. In order to fill the device with HPA, just remove the upper part from the station, unscrew the CO2 adapter, and place the cap with nozzle on any 850PSI HPA tank.

• Another amazing thing is that after the filling process, there is no pressure left in the adapter, so you may remove it without the need to de-gas.

• If you use HPA devices only, you may purchase just the upper part of the device.

• The new line of the shells and the “FiSt-2” parts are color-coded for more 'intelligent' use. For instance, “Shell-PRO EVO” has the tan/gold sector at the base, so has the CO2 chamber, soot's easy to see that they are compatible. On the other hand the “Shell-HPA” and “Shell Multi-R” have red marking to match the upper part of the “Fist-2” which will be used for filling these launching shells with HPA. Safety first!

Filling Station – “FiSt-2”™
Specifications
CODE TAG-FIST-2
Weight (Kg) 0.2000
Manufacturer TAG Innovation
Reviews
Be the first person to review this item!
Important Information

General

All images, product contents and specifications listed are based on checks performed when a product is first listed and may differ due to changes over time made by the manufacturer. This includes package contents in regards to any 'extras' provided e.g. Sample BBs.

Items used in images to promote the main item (Holsters, Camo, etc) are not supplied unless listed in the Specification tab under 'Extras'. This includes attached rails, grips, scopes, suppressors etc.

Chinese supplied Batteries and Chargers are warrantied to be not DOA (Dead on Arrival) only. We always recommend swapping out to a better quality Battery and Charger at the earliest opportunity.

Custom Painted products (Two-Tone) are non-refundable as these are painted to order. 

Unless otherwise stated, all products are sold singly.

 

Performance

Any figures used are based on tests performed on the products when they are first listed. These can vary due to changes by the manufacturer, gas pressure, gas used and a number of other factors. All figures should be treated as an approximate guide and used for reference only. 

All listed FPS are +/- 5% due to differences from rifle to rifle. If you require a guaranteed FPS, please add an upgrade/downgrade option on to your product (this may cost extra).

No airsoft AEG is warrantied for use with an 11.1v LiPo or higher voltage battery at UK velocities (373fps or lower) unless specifically recommended on the product itself. Use of higher voltage batteries can cause failures and will negate any warranty implied or otherwise.

 

Pyrotechnics

We cannot offer an exchange on pyrotechnic devices due to device failure. We are unable to guarantee that the pyrotechnic device has been stored in a moisture free environment or used correctly in accordance with the manufacturers guidelines.

Calculate Shipping

Write Your Own Review

Only registered users can write reviews. Please, log in or register