greqat guy and worth the money, having this mag well will save you money in the long run nas m4 mags are cheaper and easier to handel the converter is flawless with the feed and there is some noticeable wobble with the mags but it not a problem that will effect the feeding and it makes the g36 lokk great, i use a g36k by JG and works like a hoss

Posted on 02/08/2011 11:41 AM

the adapter is excellent but if you are using an SRC G36 then you will need to remove the feeding nozzle using something like a razor saw or coping saw, at first it seemed that it was too wide to fit but if pushed firmly or filed down slightly it fits fine.
Some magazines are ill fitting but apparently that can be fixed by putting some electrical tape around the top of the magazine, however I found that MAG magazines fit fine without tape.

Overall it's a great product if you put some work, if you are sensible and don't use an SRC the it's an even better product.
Posted on 25/07/2011 10:04 AM

Fitted fine but doesn't feed what so ever into the classic army unless you physically force the m4 mag forward.the m4 mags had way to much wobble with up to a cm in movement front to rear and 0.5mm side to side.
Posted on 09/02/2011 10:57 AM

A really nice accessory for any g36, gives your gun a cool custom look. Also if you change the hop up unit inside the SRC G36C this will fit without cutting off the feed tube. Feeds very well from the Battleaxe M4 mag I got with this.
Posted on 22/01/2011 12:44 AM

good solid converter.i bought it for my src.you have to trim the stump off to get it to fit
Posted on 05/12/2010 7:07 PM

This magwell converter is fantastic, I can now use metal m4 mags in my gun. Getting it into my KWA was tricky, but easily accomplished once I trimmed down a small part on the new magwell by about 1mm. If you buy this, dry fit every part to make sure it goes together right, I had a problem with the KWA frame locking pin because I was too eager! On the whole, this is one of the 'must have' items for any G36 owner.
Posted on 29/11/2010 6:24 PM

I recently bought one of these for a custom g36c that i am building, and I have to say whoever came up with the idea is a genius, because I do not like high cap g36c mag, personally i do not like wasting all my bb`s in one go so this is one if the best addon`s Iv`e ever seen (and also makes your g36c look the dog`s dangeley`s).

so all in all a great product.
Posted on 27/01/2010 8:20 PM

This is the ultimate simple modification to make to a G36. As the name suggests it changes the magwell to allow the weapon to accept 5.56 STANAG magazines in place of the HK G36/XM8 mags. Not only does it change the look of your weapon (essential when they seem to be becoming more and more popular), but it allows you to use cheaper, smaller and more ergronomic magazines, which what I think is a much better mag-change action.

In addition to this, the mod is amazingly easy to install, you literally remove one pin to extract the old mag well, push the Battle Ax version into the space, and put the pin back in.

Furthermore, during my test firing, I've suffered no miss-fires or jams, or anything else that you COULD expect from tampering with the feed tube.

Overall a great buy. I would recommend it to any G36 owners.
Posted on 11/02/2009 4:50 PM